|
|
|
|
|
Seagate Community Forums :
Internal Hard Drives :
Internal (ATA and Serial ATA) drives :
1TB ES.2 (ST31000340NS) firmware - SN04 -> AN05?
|
|
|
|
|
|
|
|
|
|
|

|
Re: 1TB ES.2 (ST31000340NS) firmware - SN04 -> AN05?
|
|
TomSE7EN
Byte
Posts: 4
Registered: 06-14-2008

Message 3 of 40

Viewed 21,142 times
|

|
|
Hi Tim, could you provide me the SN05 download link ? Got a 3ware 9650SE and tried the AN05 firmware with no luck, it seems it's for another hw revision of this drive. tia bye tom
|
|
|
|
06-14-2008 11:10 PM
|
|
|
|
|
|
|
|

|
Re: 1TB ES.2 (ST31000340NS) firmware - SN04 -> AN05?
[ Edited ]
|
|
TomSE7EN
Byte
Posts: 4
Registered: 06-14-2008

Message 5 of 40

Viewed 21,127 times
|

|
|
Got two ST31000340NS drives here. AN05 isn't flashable on SN04drives. The prob here is several errors in the XP event log: Source: 3waredrv CMD: 0x4D Sense: Stat=0x2 Err=0x101 Slen=18 Packet: ReqId=121 Unit=1 Len=4 FW: AEN 0x101: opcode=0x4D CMD: 0x4D Sense: Stat=0x2 Err=0x101 Slen=18 Packet: ReqId=152 Unit=1 Len=4 FW: AEN 0x101: opcode=0x4D CMD: 0x4D Sense: Stat=0x2 Err=0x101 Slen=18 Packet: ReqId=202 Unit=1 Len=4 FW: AEN 0x101: opcode=0x4D
They are reported by the driver although I don't have any probs with performance or data integrity. For me it seems the driver/controller is not always able to comunicate with the drives. These errors are not always there, only from time to time. Because of this I want to try the SN05 firmware. If this version wouldn't be for my drive I won't be able to flash it. And at last: If you send me the link via private mail it would be a lot faster (I won't make you responsible for anything in cause of trouble). bye tom
Message Edited by TomSE7EN on 06-15-2008 05:55 AM
|
|
|
|
06-15-2008 05:53 AM
|
|
|
|
|
|
|
|

|
Re: 1TB ES.2 (ST31000340NS) firmware - SN04 -> AN05?
|
|
TomSE7EN
Byte
Posts: 4
Registered: 06-14-2008

Message 7 of 40

Viewed 21,100 times
|

|
|
3DM is installed but the funny thing is: It doesn't report any errors. In the downloaded "Error Log" are no error messages either. FW SN04 to AN05: As noted in PM: Maybe you got the right S/N. bye tom
|
|
|
|
06-15-2008 03:11 PM
|
|
|
|
|
|
|
|

|
Re: 1TB ES.2 (ST31000340NS) firmware - SN04 -> AN05?
|
|
TomSE7EN
Byte
Posts: 4
Registered: 06-14-2008

Message 9 of 40

Viewed 21,036 times
|

|
|
TimB wrote: TimB wrote: I got a response from support. They've provided me with a download of the SN05 firmware. No explanation of AN versus SN naming, but at least I have the right thing now.
Just to get back to the differences between the AN05 firmware (which works flawlessly for me) and the SN05 firmware (which produces a bunch of Cable CRC Errors), I finally got a reply from Seagate support. "Seagate has not released the notes on the differences on all of the differences between the two firmwares."
That doesn't fill me with confidence... you'd expect Seagate support might have knowledge of what goes in to their firmwares... Tim.
Yep, with AN05 there are no more sense errors in the event log until now but I have to wait... LOL, maybe the errors in the former firmware was so hard, they won't post any differences because publishing it would hurt their reputation ??  P.S.: Thanks for all the ZIP bye tom
|
|
|
|
06-16-2008 06:58 PM
|
|
|
|
|
|

|
Re: 1TB ES.2 (ST31000340NS) firmware - SN04 -> AN05?
|
|
ptr727
Byte
Posts: 6
Registered: 06-17-2008

Message 10 of 40

Viewed 20,981 times
|

|
|
I am having similar problems but with an Adaptec 5805 controller and 4 x 1TB drives in RAID10. I got lots of device reset errors from the Adaptec controller reported in the NT logs. Reported the problem to Adaptec, and they told me the controller is getting CRC errors from the drives. Adaptec told me to get the AN05 firmware update from Seagate. Seagate gave me the SN05 and AN05 firmware, and told me to first update SN05 then AN05, the agent claims the fixes were not additive. After the update the errors are much less, but not 100% gone. I've had 3 controller reset events since the AN05 update. Seagate says AN05 is latest. Adaptec says the controller logs show no problems, but admit to NT eventlog entries. Problem unresolved.
|
|
|
|
06-17-2008 04:24 PM
|
|
|
|
|
|
|
|
|
|