01-23-2009 06:55 PM
Well, I have exactly the same pn than you.
The only difference, it can't do it.
I don't get it.
(you pressed a(q) isn't ?)
01-23-2009 06:56 PM
Using a ST31500341AS - 9JU138-300 - 1.5TB 7200.11 drive. Former firmware was SD18 and I updated to the new firmware. Update worked without a hitch.
I was having problems streaming music/video from the drive and the drive always hanged from just a minute in to maybe lasting 30 minutes before freezing. Now after the update I tried to watch two movies from the drive and they both hanged around the same time. Near 90 minutes give or take.
01-23-2009 07:04 PM
If I'm following this correctly, I have to get the PN off my drive to tell if this firmware will work for my ST3640323AS. Why then does Seagate not mention this on the page? All it says is if you have that model number the firmware is for you. I used their drive detect program and all it tells me is my Drive name, serial number and firmware but it does not mention PN, either does Seatools.
I am obviously missing something.
01-23-2009 07:55 PM
Correct, I pressed (A) for the ...323AS firmware.
Did you try to press (S) first? does it see the drive and does the model number look ok?
01-23-2009 08:09 PM
are you running the latest bios on mobo i see asus has fixed some hdd problems? though i assume you can see the one you have anyway if you need to do the mobo bios make sure you have the latest asus update tool for windows as well 1019 is latest i see from their site
I agree with Mike was it? try to detect the drive with scan does it register
01-23-2009 08:18 PM
01-23-2009 08:22 PM