02-18-2011 10:35 PM - edited 02-21-2011 06:21 AM
So I received 6x Seagate ST2000DL003-9VT166 hdd's. They all have CC32 Firmware.
I got all the drives from Tigerdirect.
4 of the packages say ST2000DL003, 2TB, 5900rpm, 64mb, sata-6g
2 of the packages say ST2000DL003, 2TB, 5900rpm, 32mb, sata-3g
The model numbers, sku and barcodes on ALL 6 packages are the same as are on the hard drives.
I have downloaded and installed the latest SeaTools for Windows v220.127.116.11.
I am using Win7-64bit, drives are connected via eSata cable.
According to SeaTools all the drives have 32MB cache.
What on earth is going on, the above makes no sense, are there really 32MB cache sata-3g versions of the ST2000DL003 drive?
Does Tigerdirect have their packaging mixed up?
Does SeaTools properly identify the cache size for this new drive type, why only 32mb?
Solved! Go to Solution.
02-21-2011 05:51 PM
Thanks for reporting your same issue, there is some comfort knowing that I'm not alone.
This is somewhat discouraging though that Seagate's tools cannot properly read their own drive info.
I have tried various other hdd software tools although they cannot read the cache size at all.
Hopefully a new updated version which properly reads the specs on the newer drives will be released soon.
03-08-2011 09:05 AM - last edited on 03-10-2011 10:45 AM by AlanM
ALL THE SAME PROBLEM!!
Barracuda LP ST2000DL003
cache: Can't be read by any other software. Seatools show only 32M!!
I'm in China, the model was made in China
So, where are you? is the original same to you?
(edited out part and serial number for reasons of privacy)
03-08-2011 10:27 AM
Thanks for reporting fly_sharp.
Hopefully they will release an update soon which properly identifies the drive, or, maybe we do only have 32 MB cache
03-10-2011 10:46 AM
That serial number is 64 MB cache.
In the future, please private message me any serial number or other identificatory numbers and I can help.
Let me look into this issue.
03-11-2011 09:05 AM
OK, here's the deal, and thanks again for bring this to our attention.
As noted in article Document ID: 203631 there is an issue with how the ATA specification originally handled cache size reporting.
SeaTools was updated a while back to work with 32MB cache drives, and it appears we will have to revisit it for the newer 64MB drives.
Sorry for the inconvenience.
03-12-2011 01:24 AM