FreeAgent Theater and GoFlexTV

[Zelpheriz]

Playdude, you have done it again :-) , i have flashed my FAT+ and after 1 night of testing i can confirm its smooth as silk .. :-) .. i will be playing around and report back if issues occurred.

Cheers mate ,

[playdude]

---

Zelpheriz wrote:

Playdude, you have done it again :-) , i have flashed my FAT+ and after 1 night of testing i can confirm its smooth as silk .. :-) .. i will be playing around and report back if issues occurred.

Cheers mate ,

---

Cool. Time to make the web control better and maybe add btpd as another low resource torrent solution as someone suggested earlier.  

Trekky, if you want, I can mirror the mod you make at the googlecode project page.

[Trekky]

---

playdude wrote:

Trekky, if you want, I can mirror the mod you make at the googlecode project page.

---

Please do.

[Zelpheriz]

I know that this might have nothing to do with the MOD , but i thought to share that i lose the Audio for all my MP4 video containers , also for most of the YouTube streams,  i had to switch to SPDIF/LPCM to hear it but with that i lose the DD or the DTS ... something Ver 1.26 didn't have an issue with.

[Tinwable]

I had the same problem with the mp4's.

I have also seen that my FAT+ will flash off then back on at times.  I don't know if this has anything to do with it, but it seemed to have happened after I had copied files to my hard drive over the network.  

[Older]

playdude

And you have packed what version of Transmission in Mod Firmware? How was 1.72? It seems already there was version 1.92.

[neamielu]

Hi ppl, any ideea if in moded fw the character set is correct (unicode would be great...)? (it seems to me the people from seagate are living on a different planet...) 1.45 doesn't show eastern european chrs and this is realy nasty. I found some questions searching the forum but no answers.

Also, is it possible to change the subtitle fonts and color?

thanx and don't noob me, ok, i digged enough for it without clue...

[playdude]

I think transmission 1.72 is included in the firmware. It's rock stable and doesn't crash so I keep using i. I've noticed that since version 1.8 there has been an option to schedule the time to start torrents. It wasn't stable though and crashed a lot when I used that option. Hopefully version 1.9, which I think I will add to the next firmware, works better.

[Older]

Playdude, I have understood you. Thanks.

[playdude]

New release. Better web remote control with more buttons. You can also enable or disable transmission and samba at boot time now using the web interface.

Also, the APAC version didn't start samba and transmission at boot time. I went over it and found out that the reason were the missing opt and root directories. APAC should be working fine now.

EMEA: http://fatplus.googlecode.com/files/fatplus-1.45-emea-pmp2a.zip

US: http://fatplus.googlecode.com/files/fatplus-1.45-us-pmp2a.zip

APAC: http://fatplus.googlecode.com/files/fatplus-1.45-apac-pmp2a.zip

Check out these screenshots:

http://img29.imageshack.us/img29/2848/webui1front.jpg

http://img89.imageshack.us/img89/5748/webui2remote.jpg

http://img169.imageshack.us/img169/8734/webui2remotegui.jpg