FreeAgent Theater and GoFlexTV

[Rich113]

I have read all three pages three times now, and finally understand!  Some drivers are hard installed on the FAT+ and some are not.

Add the Linksys WUSB54GC to the list of those that won't work!

Rich 113

[ngvu19]

Hi Rich 113,

Not sure if you were serious, but we cannot install drivers on the FAT+;  You only have the option to choose the wifi dongles that can work with the FAT+

Vu 

[mifronte]

In addition to working for the G wireless, the Zonet ZEW2546 also works for 2.4GHz N Wireless dual channel to achieve 300 Mbps.

For the G wirless, I connected to a Linksys WRT54GL router running DD-WRT firmware.  For the N wirless, I connected to a Linksys WRT610N router running DD-WRT firmware.

[Nitro Rider]

For the german Users, this stick does quiet well at the Fat+: buy LogiLink Wireless LAN WL0080 

With Firmware 1.26 it did not work, because the fat+ could not get any ip address from the Accesspoint.

With Firmware 1.27 it does fine. The chip is stated by LogiLink to be a Realtek RTL8192SU but in fact it is a RTL8191SU.

Message Edited by Nitro Rider on 03-01-2010 07:28 AM

[Yomane]

Hi Nitro Rider !

Thanks for this information !! I cant order the  AirLink 101 AWLL6077 by amazon.com cause they dont ship to germany ... why ever ;-)

I orderd the LogiLink-stick directly and let you all know if it works.

Stay tuned

yomane

[_DocC_]

Here's something for Mac Users.

An old Apple AirPort Express I had lying around did the trick for me. Granted it probably costs more than a lot of people here want to pay, but if you already have one….

I'm not terribly net savvy, and I guess technically it's more of an Ethernet Bridge than a WiFi connection, still after unsuccessfully auditioning so many USB WiFi Adapters, I was just happy to find something that worked.  I set up the Airport Express as part of a WDS network in Airport Utility, then just connected it to the LAN port of the FAT+.

[Yomane]

Yeahhhhh!! It works !!

I received the LogiLink-stick today and it works fine on the FAT+ !! Thanks again Nitro Rider for your help !!!

Cya

Yomane

[the.rud]

Doesn't work with NETGEAR WN111 (Wireless-N 300) either. With FW 1.26 you get "no SSID" message, while with the latest FW you get "no router" message.

[barsoom]

I tried the USB Wireless Lan 802.11N1 1T2R Adapter from monoprice.com.  Price was $13.53 plus a couple of bucks shipping.

http://www.monoprice.com/products/product.asp?c_id=105&cp_id=10501&cs_id=1050105&p_id=6147&seq=1&for...

It works just fine with my Qwest PK5000 (G) Wireless Modem/Router and FAT+ for video like revision3 and some of the newsfeed sites. Not good at all for pixel perfect and some other blogs, which are pixellated and broken up.   I also have the high-dollar Seagate adapter, which seems to have slightly greater range.  Neither one works great over a 30 foot or so distance and through a wall or two.  Final advice: get the cheaper one from Monoprice and get as close as possible to your router.

Note:  The monoprice adapter also works with the Patriot Box Office, in case, like me, you happen to have both units.

[WarheadsSE]

Currently listed on Amazon:

AirLink101 AWLL6075 (with Realtek 8191SU) for $25 and less, including shipping

straight to the full price listings