05-07-2012 02:41 PM
Hi, i have a broken chip that makes that the HD is not working, i have tried to find a replacement board, but is not available in the two places i have found, is there anyhtinh i can do?, i got the full details at home if needed.
The disk works perfectly with another PCB from my other HD204UI that i have at home, but i don't wanna miss 2 TB of disk space.
Solved! Go to Solution.
05-15-2012 04:21 AM - edited 05-15-2012 04:30 AM
05-17-2012 07:37 AM - edited 05-17-2012 07:47 AM
That reply is for fzabkar second post.
Hi, well, i have two drives with all the same pcb, and that pcb work in both, why?, no clue, but at last i have transfered the files from the faulty drive.
PD, about the pcb picture, i have seen also the broken coil, that's why i have avoided to purchase that, not sure that it will work.
05-18-2012 05:55 PM
05-19-2012 02:24 AM - edited 05-19-2012 02:25 AM
Hi, here you have, is a "coil" with 4R7 on top, same that the other down, i don't feel i can't fix with a solder.
Thanks a lot.
05-19-2012 05:12 PM
05-20-2012 12:18 AM
Hi, the second coil also seems unfixed, if i touch it, is not fully solder to the board.
I have tried to solder, but i'm unable, seems that the circuit is broken, and i can't see where to solder, anyway i will try to find those coils; did those coils have polarity?
Thanks a lot fzabkar
PD, is say good luck usualy in all my posts.